EPOXY COATING

EPOXY COAT is a two-component, colored epoxy system with solvents, offering high strength and abrasion resistance. It is resistant to acids, alkalis, petroleum products, water and seawater. Certified according and classified as a coating for surface protection of concrete mark.

EPOXY COAT is used as a protective and decorative coating on cement-based substrates (e.g. concrete, plaster, cement screeds, etc.) and metal surfaces. Suitable for industrial units, laboratories, slaughterhouses, canned food factories, tunnels, wine factories, gas stations, car repair shops, etc.

Mixing of EPOXYCOAT Components A (resin) and B (hardener) are packaged in two separate containers, having the correct fixed mixing ratio by weight. First, component A must be stirred for 1 min. Then, the entire contents of component B is added to component A. Mixing of the 2 components should take place for about 5 minutes, using a low-speed mixer (300 rpm). It is important to stir the mixture thoroughly near the sides and bottom of the container to achieve uniform dispersion of the hardener.